FUNAI HDR-B2735D Quick Setup Manual

E434JBD_QSG_EN.fm Page 1 Tuesday, June 27, 2006 11:42 AM
Finalising a disc
Finalise
You must first finalise the disc before playing it back on other unit.
SET UP
1 Press [SET UP].
2 Select "DVD Menu" using [Cursor / ], then
press [ENTER].
3 Select "Finalise" using [Cursor / ], then
press [ENTER].
ENTER
Confirmation window will appear.
Finalise disc?
Yes No
• If the disc has already been finalised, "Undo Finalise" will be
listed in the menu instead of "Finalise" (DVD-RW only). To
undo the finalisation of the disc, select "Undo Finalise" and
press [ENTER].
4 Select "Yes" using [Cursor / ], then press
[ENTER].
Final confirmation window will appear.
Are you sure?
Yes No
5 Select "Yes" using [Cursor / ], then press
ENTER
[ENTER].
A progress bar will appear, and finalising will start.
• If you want to stop the process, press [ENTER].
• This operation may take a while to be completed.
VCR Playback / Recording
Playback
1
STANDBY-ON Press [STANDBY-ON] to turn on the unit.
To play back a tape, turn on the TV and be sure to select the
input to which the unit is connected.
VCR
2 Press [VCR].
3 Insert a prerecorded tape, then press [PLAY P] to
PLAY
begin playback.
PAUSE 4 During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
5 Press [PLAY P] to resume playback.
PLAY
STOP 6 Press [STOP S] to stop playback.
7 Press [OPEN/CLOSE EJECT O] to eject the tape.
OPEN/CLOSE
EJECT
Note
• When a tape without record tab is inserted, the unit will start playback
automatically.
• Tracking will be automatically adjusted upon playback. To adjust the
tracking manually, press [PROG. / ].
© 2005-2006 FUNAI EUROPE GMBH. All rights reserved.
HDD / DVD Playback
Direct Playback
If you are playing the HDD, press [HDD] first.
If you are playing a disc, press [DVD] first.
1 Turn on the TV. Select the appropriate external
input channel.
(See page 16 on the Owner's Manual for
details.)
• If you are playing the HDD, skip to step 5.
2 Press [OPEN/CLOSE EJECT O] to open the disc
OPEN/CLOSE
EJECT
tray.
3
Place the disc on the disc tray with its label facing
up. Be sure to align the disc with the disc tray
guide.
Disc tray guide
4 Press [OPEN/CLOSE EJECT O] to close the disc
OPEN/CLOSE
EJECT
tray.
5 Press [PLAY P] to start playback.
PLAY
Playback will start.
• Depending on the media, the playback may start from a
resume point. (See page 50 on the Owner's Manual for
details.)
• If you are playing back a DVD-Video, a Disc Menu may
appear. Refer to page 48 on the Owner's Manual for more
details about the Disc Menu.
STOP 6 Press [STOP S] to stop playback.
Note
• Some discs may start playback automatically.
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing [the Number buttons] or
[PROG. / ] on the remote control.
• There is a tape with a record tab in the unit.
• The desired recording speed is selected in SP (standard play) or LP
(long play) mode by pressing [REC MODE] on the remote control.
Tape speed Recording / Playback Time
Type of tape E60 E120 E180 E240
SP mode 1 hour 2 hours 3 hours 4 hours
LP mode 2 hours 4 hours 6 hours 8 hours
1 Turn on the unit and insert a recordable tape.
Make sure that the TV input is set on the unit.
VCR
2 Press [VCR].
3 Select the recording speed using [REC MODE].
REC MODE
• The desired recording speed is selected in SP (standard
play) or LP (long play) mode by pressing [REC MODE].
4 Select the desired channel to record using
PROG.
[PROG. / ] or [the Number buttons].
5 Press [REC/OTR] (VCR) to start recording.
REC/OTR
To temporarily stop recording or to resume it, press
[PAUSE p]. After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the tape and the
video head from damage.
6 Press [STOP S] when the recording is completed.
STOP
1VMN23201 / E434JBD
EN
Quick Setup Guide
Congratulations on your purchase of FUNAI Hard Disc Drive / DVD Recorder. This Quick Setup Guide takes you through the first-time setup with simple
instructions so you can enjoy exceptional audio and video quality as soon as possible. Please refer to the Owner's manual for detailed instructions. If you
have read your instructions and still need assistance, call helpline at 0870-240-5807. Unless stated, all procedures described use the remote control.
Recording and Playback Information
Playable discs
Disc Logo Disc Logo
DVD-RW
DVD-Video (VIDEO/VR mode,
DivX files)
®
DVD-R
CD-DA
(VIDEO mode,
(AUDIO CD)
DivX ® files)
CD-RW
VCD (CD-DA FORMAT,
(VIDEO CD) MP3, JPEG,
DivX files)
®
CD-R
(CD-DA FORMAT,
Kodak Picture CD
MP3, JPEG,
DivX files)
®
Connecting to a TV
Using the Scart jack
To Aerial jack
TV
Audio/Video cable
(not supplied)
Scart/RCA cable
Scart adaptor
(not supplied)
(not supplied)
Scart cable (not supplied)
HDD/DVD/VCR HDD/DVD
DIGITAL AUDIO S-VIDEO
AV2(DECODER)
AUDIO OUT OUT OUT
HDD/DVD/VCR
AERIAL
OPTICAL COAXIAL L
AV1(TV)
R
RF OUT
Using the S-VIDEO OUT jack and the AUDIO OUT jacks (only for HDD / DVD)
To Aerial jack
TV
AUDIO IN S-VIDEO IN
Audio cable S-Video cable
(not supplied) (not supplied)
HDD/DVD/VCR HDD/DVD
DIGITAL AUDIO S-VIDEO
AV2(DECODER)
AUDIO OUT OUT OUT
HDD/DVD/VCR
AERIAL
OPTICAL COAXIAL L
AV1(TV)
R
RF OUT
Note for a TV with no S-Video input jacks or Scart jack:
• This unit has no RF modulator, so this type of TV cannot be used.
HDR-B2735D
Recordable discs
Disc type Disc format Functions
Playing back, Limited
Video mode
recording, Limited editing
Playing back, Recording,
VR mode
Original / Playlist editing
Playing back, Limited
Video mode
recording, Limited editing
This unit can play back DVD discs labelled with the
following region codes only:
2
Antenna Connect AV1 (TV) Scart jack of this unit
to the Scart jack of your TV.
Cable
Use the supplied Scart cable.
Signal
Note
• If your TV does not have a Scart jack, use
or
a commercially available Scart adaptor or
Scart / RCA cable to connect.
Use only AV1(TV) or AV2(DECODER)
jack for the VCR output signals of this
RF cable
unit.
(supplied)
RF cable
(not
supplied)
If your TV has an S-Video input jack, use
Antenna
S-Video and Audio cables to connect.
Cable
Signal
1 Connect S-VIDEO OUT jack of
this unit to the S-Video input
or
jack of your TV. Use a
commercially available S-Video
RF cable
cable.
(supplied)
2 Connect the AUDIO OUT jacks of
this unit to the analogue Audio
input jacks of your TV. Use a
commercially available Audio
cable.
RF cable
(not
supplied)
EN