Reset All - FUNAI WL6D-M102 Owner's Manual

Clock
Setup A General Setting A Clock
Clock Setting
01 / 01 / 2014 (WED)
1
Enter the date (day / month / year) using
[K \ L].
Press [1] to move the cursor to the next field. If you
want to go back to the previous field, press [0].
Enter the time (hours / minutes) using [K \ L],
2
then press [ENTER].
The clock will start.
• Although seconds are not displayed, they will be
counted from zero.
Note
• Your clock setting will be lost if either there is a power
failure or the unit is unplugged for more than 30
seconds.
• The clock is not displayed in standby mode because the
unit will return to a new Power Saving mode (ECO) with
the display off.
DivX ®
Setup A General Setting A DivX
DivX® VOD
DivX Subtitle
DivX® VOD
®
Provides DivX VOD registration code and deactivation
code.
Refer to page 38 for more details.
DivX Subtitle (Default: OFF)
Set the DivX ® subtitle.
DivX Subtitle
OFF
English
Bulgarian
Czech
Dutch
French
German
Hungarian
0 : 00
HDMI
Setup A General Setting A HDMI
• Make sure that the HDMI cable is connected and the TV
input is set to HDMI.
Format
HDMI udio A
RGB Ran
ge
Format (Default: RGB)
You can select the colour space for HDMI output.
Set the appropriate colour space for your display device.
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of
the setting.
Format
RGB
YCbCr
HDMI Audio (Default: ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the DIGITAL
AUDIO OUT (COAXIAL) jack to your audio system, etc.),
you can set the HDMI audio output off.
• Set to "OFF" when the HDMI sound is not required.
HDMI Audio
ON
OFF
RGB Range (Default: Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
• Select "Enhanced" if the black-white contrast is not
clear.
• This setting is effective only for HDMI RGB output.
RGB Range
Normal
Enhanced
A General Setting A Reset All

Reset All

Select "Yes" using [K \ L], then press [ENTER].
Reset to factory default?
Yes
No
"Are you sure?" will appear. Select "Yes" using [K \ L], and
then press [ENTER].
Note
• The settings listed below will remain unchanged even after
resetting to the factory default.
- Clock setting
- Parental lock setting
- DivX ® VOD code
- Timer programmes
- OSD language setting
61
EN