Displaying The Image Of Your Application (Iphone With 30-Pin Connector); Displaying The Image Of Your Application (Iphone With Lightning Connector) - Pioneer AVIC-8100NEX Operation Manual

Using your iPhone or smartphone applications
6 Touch the following keys to adjust the
line to fit smartphone image size.
Moves the line to the left.
Moves the line to the right.
Moves the line upward.
Moves the line downward.
7 Touch [Preview].
p Confirm that the whole image fills the
screen.
8 Touch [OK].
p If you want to adjust the setting again from
the beginning, touch [RESET].
Displaying the image of your
application (iPhone with 30-pin
connector)
You can set an image of an application for
iPhone, which is not compatible with
AppRadio Mode, to be shown on the screen.
p Depending on the type of application, you
may not be able to see the image on the
screen.
p You can only control the application on the
connected device.
p When you touch the display in this func-
tion, "Don't Touch" mark appears on the
upper right corner of the screen.
1 Connect your iPhone.
= For details of the connections, refer to the
Installation Manual.
2 Press the HOME button to display the
Top menu screen.
3 Touch [APPS].
A message, which notifies you that your
iPhone can launch the application, appears
on the screen.
A message, which asks you whether you want
to launch your application, appears on your
iPhone.
4 Use your iPhone to refuse to launch the
application.
5 Touch [OK] on the screen of this pro-
duct.
The black screen appears.
6 Launch an application on your iPhone.
An image of the application appears on the
screen.
7 Press the HOME button to return to the
Top menu screen.
Displaying the image of your
application (iPhone with
Lightning connector)
You can set an image of an application for
smartphone, which is not compatible with
AppRadio Mode, to be shown on the screen.
p Depending on the type of application, you
may not be able to see the image on the
screen.
p When you use this function, do not connect
other devices via Bluetooth wireless tech-
nology. Be sure to disconnect your
Bluetooth device before using this func-
tion.
p You can only control the application on the
connected device.
p When you touch the display in this func-
tion, "Don't Touch" mark appears on the
upper right corner of the screen.
1 Connect your iPhone.
p The cable connection method varies de-
pending on your device.
= For details of the connections, refer to the
Installation Manual.
Chapter
22
137
En