Pioneer AVIC-8100NEX Operation Manual page 235

Appendix
MirrorLink
Message
The application list could not
be read out.
There is no supported applica-
tion on your MirrorLink de-
vice.
Communication error oc-
curred.
Launching the application
failed.
Failed to display the screen of
your device because of irregu-
lar resolution.
If your MirrorLink device is
locked, please unlock it when
it is safe and lawful for you to
do so.
Cause
Failed to load the application list.
No supported applications can be
found.
There was a communication error.
Failed to launch the application.
The image size is too large.
The MirrorLink device is locked.
Action
! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.
! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorized Pioneer Service Sta-
tion.
Install MirrorLink compliant applications to
your MirrorLink device.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.
! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorized Pioneer Service Sta-
tion.
Try again.
The size of the images transferred from the
device exceeds 800 × 480.
Unlock the MirrorLink device.
Appendix
235
En