Watching The Simulation Of The Route - Pioneer AVIC-8100NEX Operation Manual

Chapter
06 Checking and modifying the current route
Watching the simulation of the
route
You can run a simulation of the navigation for
the current route, as a demonstration. Follow
the steps below.
1 Set a route to your destination.
= For details, refer to Chapter 5.
2 Press the MAP button.
The Map screen appears.
3 Touch the following key.
4 Touch [Route Summary].
The "Route Summary" screen appears.
5 Touch the following key.
6 Touch [Simulation].
The simulation starts from the starting point of
the route, and using a realistic speed, it leads
you through the whole recommended route.
p During simulation, you can use the follow-
ing control keys (they disappear after a few
seconds but you can view them again by
touching the map).
50
En
Displays the navigation menu on
the Map screen.
Displays the shortcuts.
Jumps to the previous gui-
dance point (maneuver).
Pauses the simulation.
Jumps to the next guidance
point (maneuver).
Increases the speed of the si-
mulation to four, eight or 16
times the normal speed.
Touching the key again returns
to the normal speed.
# Touch [Close] to stop the simulation.