Connecting To The Display With 26-Pin - Pioneer AVIC-880DVD Installation Manual

Connecting the system
Connecting to the display with 26-pin input (e.g. AVH-P7600DVD, AVH-P5700DVD, etc.)
This product
Black
6m (19 ft. 8 in.)
(e.g. AVH-P7600DVD, AVH-P5700DVD,
AVH-P6600DVD, AVH-P7500DVD,
AVH-P6500DVD, AVD-W6210, AVX-P8DVD)
Yellow
Not used.
Power cord
See pages 9-11.
26-pin cable (supplied)
Display Unit
Microphone
See page 27.
GPS antenna
See page 22.
5m (16 ft. 5 in.)
There may be no voice guidance depending on a com-
bined display unit. In that case, an external speaker
(commercially available) must be connected to the SP-
OUT jack (3.5 ø MINI JACK, 1 W max [8 Ω]) on this
unit's back.
When combining multi-channel processors, Pioneer
external speaker must be connected to the SP-OUT jack
on the navigation's back. However, if your display has
the GUIDE SP OUT jack that can output the voice guid-
ance, connect the external speaker to the display.
6m (19 ft. 8 in.) 6m (19 ft. 8 in.)
When resetting AV Head Unit or AV
system display
When pressing the reset button of AV Head
Unit or AV system display while Navigation
System and AV Head Unit or AV system dis-
play (AVH-P7600DVD, AVH-P5700DVD,
AVH-P7500DVD, AVH-P6500DVD, AVH-
P6600DVD, AVX-P8DVD) are combined,
make sure that ACC is turned OFF. If the
reset button is pressed while ACC is ON, it
may not work properly.
8