Pioneer AVIC-8100NEX Operation Manual page 193

Hide thumbs Also See for AVIC-8100NEX:
Table of Contents

Advertisement

System settings
6
7
1 GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Signal com-
Color
munication
Orange
Yes
Yellow
Yes
p When the GPS antenna is connected to
this product, "OK" is displayed. When
the GPS antenna is not connected to
this product, "NOK" is displayed.
p If reception is poor, please change the
installation position of the GPS antenna.
2 Positioning Status
Displays the positioning status (3D posi-
tioning, 2D positioning, or no positioning),
the number of satellites used for position-
ing (orange), and the number of satellites
whose signal has been received (yellow). If
signals from more than three satellites are
received, the current location can be mea-
sured.
= For details, refer to Positioning technol-
ogy on page 236.
3 Installation
Indicates whether the installation position
of this product is correct or not. If installed
correctly, "OK" appears. When this product
is installed at an extreme angle exceeding
the limitation of the installing angle, "NOK
(Inst. Angle)" will be displayed. When the
angle of this product has been changed,
"NOK(Vibration)" will be displayed.
4 Speed Pulse
5 Illumination
6 Back Signal
7 iDataLink
Used in posi-
tioning
Yes
No
The Speed Pulse value detected by this pro-
duct is shown. "0" is shown while the vehi-
cle is stationary.
When the headlights or small lamps of the
vehicle are on, "ON" is displayed. When the
small lamps of the vehicle are off, "OFF" is
displayed. (If the orange/white lead is not
connected, "OFF" appears.)
When the shift lever is shifted to "R", the
signal switches to "High" or "Low". (One of
these is displayed depending on the vehi-
cle.)
When the optional iDatalink adapter is con-
nected and the protocol version matches,
"OK" is displayed. If the version does not
match, "Unsupported Version" is dis-
played. If the optional iDatalink adapter is
not connected, "NOK" is displayed.
Chapter
32
193
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-7100nexAvic-6100nexAvic-5100nex

Table of Contents