Browsing The Data Field; When The System Cannot Receive A Gps Signal - Pioneer AVIC-8100NEX Operation Manual

How to use the map
If you are approaching a complex intersection
and the necessary information exists, the map
is replaced with a 3D view of the junction.
Signposts
Junction view
p If the data for these items is not contained
in the map data, the information is not
available even if there are signs on the ac-
tual road.
When you set "Offer Freeway Services" to
"on", the
icon appears while you are driving
on freeways. Touch the icon to open the details
of the next few exits or service stations. In ad-
dition, touch an item to show its location on
the map. You can set it as a waypoint easily.
p If you want to display other types of POIs
for the exits, you can change the icons in
"Services Displayed".
= For details, refer to "Navigation Map" set-
tings on page 66.

Browsing the data field

The data fields are different when you are navi-
gating a route and when you have no specified
destination. For example, the data field pro-
vides the following information.
! When the route is set:
Distance to final destination, time needed
to reach the final destination and estimated
arrival time are shown.
! When the route is not set:
Direction or altitude is shown.
p Touching and holding the field allows you
to display the setting screen for the field.
p The estimated time of arrival is an ideal
value calculated based on the speed limit
value set in "Max. Speed" of vehicle type
setting and the actual driving speed. The
estimated time of arrival is only a reference
value, and does not guarantee arrival at
that time.
= For details, refer to "Route Preferences"
settings on page 63.
When the system cannot
receive a GPS signal
A triangular mark shows the current position
of your vehicle.
Chapter
04
35
En