Using Tunescan; Using Category Scan; Using Tunemix - Pioneer AVIC-8100NEX Operation Manual

Chapter
27 Using the SiriusXM

Using TuneScan

When you activate the TuneScan
will hear a few seconds of the songs, which
have not been listened to, from each of the
music channels stored as presets on the cur-
rent band.
p This function is available only when the
channel that is tuned in to supports the Tu-
neScan function.
p If fewer than two music channels are
stored as presets in the current band, the
message, "No Content" is displayed, and
you cannot perform scan tuning. Add more
music channels as presets.
p TuneScan may take a few minutes to be-
come available after the unit is turned on
or the preset band is changed.
1 Touch the preset channel list display
key.
The preset channel list appears.
2 Touch the following key.
1
1 Continues playing the current scanning
song or channel.
p You can stop the TuneScan feature to
listen to the current song and remain lis-
tening to the channel it is on.
2 Skips forward or backward.
162
En
®
satellite radio
™
™
feature, you
Scans music channels in the cur-
rent band for songs, plays a found
song for a few seconds, and then
continues to scan another song.
Each song on the current channel
plays for a few seconds at a time.
2 3
Touching [o] skips to the previous song
during TuneScan or to the previous channel
during category scan.
Touching [p] skips to the next song dur-
ing TuneScan or to the next channel during
category scan.
3 Cancels scan play and returns to the ori-
ginal channel.

Using category scan

You can scan each channel in the selected ca-
tegory.
1 Touch the following key.
Displays the list screen.
2 Touch the desired category.
3 Touch the following key.
Performs scan tuning in the se-
lected category. The live broadcast
for each channel in the current ca-
tegory plays for six seconds at a
time.

Using TuneMix

™
TuneMix
plays a unique blend of songs from
music channels stored in the current
SiriusXM Preset Band.
p SXV300 or later SiriusXM Connect vehicle
tuner (sold separately) is required to use
this function.
p If fewer than two music channels are
stored as presets in the current band, the
message, "No qualified TuneMix music
channels in this band." is displayed, and
you cannot use TuneMix
music channels to presets.
p TuneMix may take a few minutes to be-
come available after the unit is turned on
or the preset band is changed.
™
™
. Add more