Using The Audio Mix Function - Pioneer AVIC-8100NEX Operation Manual

Using your iPhone or smartphone applications
3 Press the HOME button to display the
Top menu screen.
4 Touch [APPS].
If the launcher application is installed in the
MirrorLink device, the application launches.
If not, the Application menu screen will ap-
pear.
p If the AVICSYNC App function is not turned
off, a message confirming whether to turn
off the AVICSYNC App function appears.
5 Touch the desired application icon.
The desired application is launched, and the
application operation screen appears.
p Some applications may not launch depend-
ing on the state of the connected device. If
it does not launch, launch the application
according to the application startup mes-
sage.
6 Operate the application.
7 Press the HOME button to go back to
the Top menu screen.

Using the audio mix function

You can output audio mixing AV source and
an application for iPhone or smartphone
when the AppRadio Mode or MirrorLink
mode is used.
p When the audio mix function is set to on,
the voice guidance of the navigation sys-
tem is not output. To output the voice gui-
dance of the navigation system, set the
audio mix function to off.
p If the screen is switched to the Map screen
when the audio mix function is turned on,
the message, "NOTE: Navigation Sounds
are unavailable with the current app &
source selections. Do you want to out-
put Navigation Sounds instead of App-
based Audio?" is displayed. To output
voice guidance for the navigation system,
touch [Yes].
1 Start up the AppRadio Mode or
MirrorLink mode.
2 Press the VOL (+/–) button.
The audio mix menu will be displayed on the
screen.
1
1 Touch to mute. Touch again to unmute.
2 Sets whether to switch the sound mix func-
tion on or off.
! Left tab: The audio mix function is en-
abled (mix on). The App volume is dis-
played. If you touch the App volume, the
volume keys will be displayed.
! Right tab: The audio mix function is dis-
abled (mix off).
3 Adjusts the application audio volume.
Each touch of [+] or [–] increases or de-
creases the volume level.
p The AV operation screen and the Applica-
tion screen can be switched by pressing the
MODE button.
p The right tab is not displayed on the AV op-
eration screen.
p You cannot adjust the volume of the main
sound on the screen. Press the VOL (+/–)
button to adjust the volume of the main
sound.
p The audio mix menu is displayed for four
seconds. If the screen disappears, press the
VOL (+/–) button again. The screen reap-
pears.
2 3
En
Chapter
22
141