Using Idatalink; Activating Idatalink Maestro; Updating The Idatalink Maestro Module; Starting Procedure - Pioneer AVIC-8100NEX Operation Manual

Using iDatalink

By connecting the optional iDatalink adapter,
you can access the satellite radio source pro-
vided for the vehicle and the vehicle informa-
tion can be displayed on this product.
Important
! For information on installing the iDatalink
adapter, refer to the operating manual of the
iDatalink adapter.
! After installing the iDatalink adapter, be sure
to check the operations.
! For details about vehicle models that are com-
patible with the iDatalink adapter, refer to the
information on our website.
! Functions and displays vary depending on the
vehicle model. For details of the functions
available for each model, refer to the informa-
tion on our website.
! The iDatalink list screen can be scrolled up or
down by page.
! Please note that the device number of this
product and a computer with internet access
are required to program your Maestro RR
module. For troubleshooting information
about "iDatalink" functions, visit
www.idatalinkmaestro.com/support or call
iDatalink Maestro Technical Support toll-free
at 877.212.6169 ext 7900.

Activating iDatalink Maestro

Before using and/or connecting the
iDatalink Maestro adapter, you will need to
first flash the Maestro module with the appro-
priate vehicle and head unit firmware.
Updating the iDatalink Maestro
module
1 Find the last six numbers (device num-
ber) on the label on the packaging of this
product or on this product itself.
p Device number input is required for updat-
ing the iDatalink MAESTRO module. Take a
note of the device number as necessary.
p You can also check the device number on
the "Firmware Information" screen of this
product.
= For details, refer to Displaying the firm-
ware version on page 190.
2 Access the Automotive Data Solutions
Inc. website (www.idatalinkmaestro.com/)
and follow the on-screen directions to con-
figure the desired firmware.
p When the serial number input is required,
please input the device number of this pro-
duct.
3 Install the vehicle/head unit specific
firmware on your iDatalink Maestro mod-
ule.
= For details, please refer to Automotive Data
Solutions Inc. website.
4 Connect this product to
iDatalink Maestro, and then install this pro-
duct to the vehicle.
The iDatalink function will be active.

Starting procedure

1 Display the AV source selection screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 24.
2 Touch [My Vehicle] on the AV source se-
lection screen.
The following screen appears.
3 Touch [USB/iPod], [SiriusXM] or
[Bluetooth Audio] when you want to oper-
ate iDatalink.
Chapter
25
149
En