Warnings" Settings; Navigation Map" Settings - Pioneer AVIC-8100NEX Operation Manual

Chapter
10 Customizing preferences of the navigation
Announce System Messages
When a system message appears, this naviga-
tion system can read out the message.

"Warnings" settings

IMPORTANT
! This system is able to warn you if you exceed
the current speed limit. This information may
not be available for your region (ask your local
dealer), or may not be fully correct for all
roads on the map.
! You are liable for ensuring that using this fea-
ture is legal in the country where you intend
to use it.
Speed Warning
! Warn When Speeding
You can select whether you want to receive
visible and/or audible warnings.
The following alert types are available:
— Audio and Visual: When selected, audi-
ble and visible warnings will go off
when you exceed the speed limit.
— Visual: When selected, visible warnings
will go off when you exceed the speed
limit.
! Speed Limit Always Visible
You can select whether you want to see the
speed limit sign on the map all the time.
When you set the speed limit to always be
visible, the color of the speed limit sign
changes when you exceed the speed limit.
! Warn at *** percent of the Speed Limit
(Outside Cities)
You can receive a warning when you reach
the set percentage of the speed limit in
rural areas.
! Warn at *** percent of the Speed Limit
(in Cities)
You can receive a warning when you reach
the set percentage of the speed limit in
urban areas.
66
En
Alert Points
This setting allows you to receive a warning
when approaching alert points like school
zones or railroad crossings.
= For details, refer to Setting the alert point
warnings on page 70.

"Navigation Map" settings

Map Display
You can see the effect when you change a set-
ting.
! Viewpoint
You can adjust the basic zoom and tilt le-
vels to your needs. Three levels are avail-
able.
! Color Mode
You can switch between daytime and night-
time color modes or let the software switch
between the two modes automatically a
few minutes before sunrise and a few min-
utes after sunset.
! Day Map Color
You can select the color scheme used in
the daytime map.
! Night Map Color
You can select the color scheme used in
nighttime map.
! Landmarks
This setting shows or hides 3D landmarks
which are 3D artistic or block representa-
tions of prominent or well-known objects.
p For AVIC-6100NEX and AVIC-5100NEX,
this function becomes effective only
when the additional map data is in-
stalled.
! Buildings
This setting shows or hides 3D city models
which are 3D artistic or block representa-
tions of complete city building data con-
taining actual building sizes and actual
positions on the map.
p For AVIC-6100NEX and AVIC-5100NEX,
this function becomes effective only
when the additional map data is in-
stalled.