Parking A Call - Splicecom IP 530 User Manual

Alternatively,
Tran
1
2
3
Tran
4
Unannounced Transfer (Blind Transfer)
Tran
1
2
Tran
3
Parkin g a call
The Park facility allows calls to be put on hold in a system area so that the call can be picked up by any
other extension on the system. ma ximiser provides four Park Slots (1, 2, 3 and 4) by default. If a call
is parked in one of these Park Slots users of PCS 580, 570, 560, 410 and 100 IP 530s or PCS 60 and PCS
50 IP Softphones or Phone Partners, with access to these park slots, will see the parked call and can
retrieve it if required.
To park a call
Hold
1
*51
2
To pick up a parked call
*52 to *55
1
Answer
2
Please note:
V5.51/1210/1
Place the call on hold by pressing the soft key underneath "Tran" (2
LHS)
Enter the number to be dialled (internal or external number).
Wait for the call to be answered and announce the caller.
To transfer the original call, press the soft key underneath "Tran" (2
LHS).
Place the call on hold using the HOLD/RECALL key, or the soft key
underneath "Tran" (2
nd
Enter the number to be dialled (internal or external number).
To complete the transfer, once the called number is ringing, press the
HOLD/RECALL key, or the soft key underneath "Tran" (2
Once on the call press the soft key underneath "Hold" (extreme LHS).
Dial *51 to Park the call. The Park Slot on which the call is now held will be
announced to you.
Dial *52 - *55 to pickup up calls in Park Slots 1 – 4 respectively.
Your phone will ring as the Parked call is presented to you. Press the
"Answer" Soft Key to pick-up the call.
from LHS).
8
IP 530 User Manual
from
nd
from
nd
from LHS).
nd
Basic Call Handling
IP 530 User Manual