Kyocera Mita WP31C Operation Manual page 85

3.5 Changing the Interface Parameters
Note
Printing a Network Interface Status Page
You can have your printer print out a network status page when the printer prints the status
page. The network status page shows the network addresses, and other information under
various network protocols about the network interface card. The default setting is Off
(print disable).
Printing out a network interface status page may not be possible with the optional
network interface card. For details, see the manual for the network interface.
A sample network status page is shown on
1 1 1 1
Press the MENU key.
2 2 2 2
Press the ENTER key repeatedly until Interface > appears.
Interface
Parallel
3 3 3 3
If the interface is other than network, press the ENTER key. A blinking question
mark (?) appears.
Interface
? Parallel
4 4 4 4
Press the or
Interface
? Network
5 5 5 5
Press the key and then press the
>Network Status Page.
>Network Status
Page Off
6 6 6 6
The default setting is Off. If it is set to On, press the ENTER key. A blinking
question mark (?) appears.
>Network Status
Page ? Off
7 7 7 7
Press the or
>Network Status
Page ? On
Figure 3-7 on page
>
key repeatedly until Network appears. Press the ENTER key.
or
key to select On.
3-40
3-41.
key repeatedly until the display shows