Table of Contents
Advertisement
3.13.2 Automatic Form Feed Timeout Setting
6 6 6 6
Press the
or
following order:
English
Francais
Deutsch
Italiano
Nederlands
Espanol
Portuglls
7 7 7 7
Press the ENTER key.
8 8 8 8
Press the MENU key. The display returns to
If the printer receives no data for a certain period, it will time out and release the current
interface. It prints whatever data it has in its buffer and feeds out the page. The default form
feed timeout time is 0 seconds. You can adjust the time-out time as follows:
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
Others
3 3 3 3
Press the
key.
4 4 4 4
Press the
or
>Form Feed
Time Out 000sec.
5 5 5 5
To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
>Form Feed
Time Out 000sec.
6 6 6 6
Press the
or
the desired time. The timeout time can be between 0 and 495 seconds, in 5-second
increments. Use the
7 7 7 7
When the desired timeout time is displayed, press the ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.
key. The display cycles through the available selection in the
key repeatedly until Others > appears.
>
key repeatedly until >Form Feed Time Out appears.
key to increase or decrease the value at the blinking cursor and set
and
keys to move the cursor right and left.
3-89
3.13 Other Modes
Ready
.
Advertisement
Table of Contents
