Table of Contents
Advertisement
10
10
10
10
Press the MENU key. The display returns to Ready.
Maximum Space Assigned to Temporary Code Jobs
This changes the hard disk space that holds temporary code jobs. You can change the
maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size
of free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded
off in unit of 50 MB. For example, if the total hard disk space is 10 GB, the default size is
1550 MB.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
e-MPS
3 3 3 3
Press the
key.
4 4 4 4
Press the
or
>e-MPS
Configuration
5 5 5 5
Press the
key.
6 6 6 6
Press the
or
>>Temp. Code JOB
Size
7 7 7 7
To change the maximum disk space, press the ENTER key. A blinking cursor (_)
appears.
>>Temp. Code JOB
Size
8 8 8 8
Press the
or
cursor. Use the
9 9 9 9
When the desired size is displayed, press the ENTER key.
10
10
10
10
Press the MENU key. The display returns to Ready.
key repeatedly until e-MPS > appears.
>
key repeatedly until >e-MPS Configuration > appears.
>
key repeatedly until >>Temp. Code JOB Size appears.
1550MB
1550MB
key to increase or decrease, respectively, the value at the blinking
and
keys to move the cursor right and left.
3-31
3.4 e-MPS
Advertisement
Table of Contents
