Setting Mp Tray Paper Size - Kyocera Mita WP31C Operation Manual

3.10 Paper Handling

3.10.2 Setting MP Tray Paper Size

Note
When you use the MP tray in cassette mode, you should set the MP tray size to the paper
size that is used to format the job to print. If the sizes do not match, printing will not be
performed on the correct size paper. The default setting is Letter size for the U.S. and
Canada and A4 for other countries.
For more information about the paper sizes that you can feed from the MP tray, see
2 Handling Paper.
Feeding the paper having a paper size which does not match the current paper size
from the MP tray can cause paper jam.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
the current MP tray paper size is A4.
>MP Tray Size
A4
5 5 5 5
To change the paper size, press the ENTER key. A blinking question mark (?)
appears.
key repeatedly until Paper Handling > appears.
key repeatedly until >MP Tray Size appears. In this example,
3-70
Chapter