Loading Paper Into The Mp (Multi-Purpose) Tray - Kyocera Mita WP31C Operation Manual

2.3 Loading Paper
2.3.2

Loading Paper into the MP (Multi-Purpose) Tray

Perform the following procedure to load paper into the MP tray.
1 1 1 1
Open the MP tray located on the right side of the printer.
Figure 2-7
2 2 2 2
Adjust the position of the paper guides according to the size of the paper you will
use.
Paper Guide
Figure 2-8
3 3 3 3
Square the edges of the paper and insert into the MP tray.
Figure 2-9
4 4 4 4
Set the MP tray paper size on the printer's operator panel. Refer to
the Operator Panel, section 3.10.2 Setting MP Tray Paper Size on page
2-10
MP Tray
Paper Guide
Chapter 3 Using
3-70.