Customizing Rings And Volume - Escene SayHi ES330 User Manual

Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
If you want to ...
network setting --1) Choose " System setting" > " Advanced setting" £»
--2) Enter the password required£¨ The default is empty) £»
--3) Choose " Network" , you can configure the following parameters:

Customizing Rings and Volume

If you want to...
Change the ring --1) Choose " System setting" > " Phone setting" > " Ring type" £»
tone --2) Press navigation to choose ring tone£»
--3) Press
Escene Communication
-Type: static IP or DHCP
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate subnet mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
softkey Choose a ring tone to play a sample of it.
Press softkey to Stop Playing
Press OK or
Press softkey to cancel
25
Then...
Then...
softkey to set the ring tone,
www.escene.hk 25