Presets / Power Saving; Preset Signal Timing Table, Power Saving, Plug & Play; Power Saving System - Hatteland JH 21C07 MDK User Manual

PRESETS / POWER SAVING

PRESET SIGNAL TIMING TABLE:
Microprocessor-based preset functions can store 26 sets of geometry settings including the
standard settings. The following industrial standard settings have been pre-programmed by
the factory.
Preset Resolution
01: 640 x 400
02: 800 x 600
03: 1024 x 768
04: 1280 x 1024
05: 1600 x 1200
06: 1856 x 1392
Note: - Input signals with approximately the same frequencies may be regarded as the same
signal.
- Standard settings are subject to change without notice.

POWER SAVING SYSTEM:

This monitor complies with VESA and ENERGY STAR
saving system works only when used with VESA DPMS compliant PC's and/or graphic controllers.
VESA DPMS
MODE
ON
Stand-by Blanked
Suspend Blanked
OFF Blanked
Note:
- When the user switch the power OFF during the monitor is in OFF mode, sometimes
the LED flashes continues a few seconds afterwards. This is not an failure.
PLUG & PLAY:
This monitor complies with VESA DDC1/2B specifications. Plug & Play is a system with computer,
peripherals (including monitors) and operating systems. It works when the monitor is connected to
DDC ready computer, which is running an operating system software that incorporates Plug & Play
functionality.
Vert. Frequency(Hz)
70
85
85
85
90
72
VIDEO H.Sync.
Active Yes
No
Yes
No
Horiz. Frequency(Hz)
31.47
53.67
68.68
91.15
112.50
102.95
power saving requirements. The power
©
V.Sync. Power
Yes 130 W (typical)
Yes less than 15W
No less than 15W
No less than 5W
11
Product: JH 21C07MDK
Video Mode
VGA
VESA
VESA
VESA
VESA
Power Saving States
Power LED
Lighting Green
Flashing quickly
Flashing quickly
Flashing slowly
Product: JH 21C07MDK