Optional Parts Installation; Drain Pump Unit; Duct Type - Fujitsu AU*G36LRLA Design & Technical Manual

7.

OPTIONAL PARTS INSTALLATION

7-1.

DRAIN PUMP UNIT

7-1-1.

DUCT TYPE

MODEL : UTZ-PX1NBA
„ „
SPECIFICATIONS
„ „
Height of drain up
Power source
Power input (230V, 50/60Hz)
Current (230V, 50/60Hz)
Dimensions (H x W x D)
Weight
Connection pipe diameter
Direction of pipe connection *1
Angle of pipe connection *2
Control method
safety device
*1 : Direction of pipe connection
APPLICATION INDOOR UNITS
„ „
Duct (Single system)
Duct (Simultaneous multi system)
INSTALLATION PLACE
„ „
470 or more
Front view
1177
1135
Air
Top view
Unit
mm Maximum 1000
- 220-240V, 50/60Hz
W 12 / 10.8
mA 114 / 92
mm 176 x 178 x 154
kg 2.5
- VP25 (I.D.25mm, O.D.32mm)
- 360°
- 0° (Horizontal)-90° (Vertical)
- Control board of indoor unit
- Float switch, Thermal fuse
*2 : Angle of pipe connection
Type
150 or more
Drain pump unit
166
178
- (05-80) -
Specifications
Model name
AR¾G36LM, AR¾G45LM
AR¾G22LM, AR¾G24LM
Connected drain pipe (VP25)
(I.D. 25mm; O.D.32mm)
Rear view
Note:
Leave the space required to service the unit.
Set a maintenance hole near the drain pump unit.
(Unit : mm)