Fujitsu AU*G36LRLA Design & Technical Manual page 322

Attaching the hook plate
z „
Attach the Hook Plate by each corner of the Fresh Air Intake Kit.
(The attaching screws are attached to the body of the Fresh Air Intake Kit and must be loosened
before installing)
Cover installation
z „
(1) Remove the drain cover attached to the decorative panel and install onto the Fresh Air Intake
Kit.
(2) Set the cover in position with screws(2 places) as shown in the diagram. Apply the
INSULATION  after installing the cover.
Screw x 4
5 - 10
Drain cover
Screw x 4
INSULATION  x 4
Cover
- (05-93) -
Hook plate
Screw