Fujitsu AU*G36LRLA Design & Technical Manual page 257

2-REMOTE CONTROLLERS CONTROL
„ „
Control locally and from a remote point is possible using 2-remote controllers.
Connection examples
z „
Single system
Wired + Wired
remote controller
*For 2 wired-type remote controllers, specify a primary and a secondary remote controller.
*The timer and 10°C HEAT (Wireless R.C. only) functions of the remote controller specified as the secondary cannot
be used.
*When using a wireless type remote controller, install IR Receiver unit to the indoor units.
(Cassette type, Duct type)
Simultaneous multi system
Wired + Wired
remote controller
*For 2 wired-type remote controllers, specify a primary and a secondary remote controller.
*The timer and 10°C HEAT (Wireless R.C. only) functions of the remote controller specified as the secondary cannot
be used.
*In simultaneous multi connection, the timer and 10°C HEAT functions by using the wireless remote controller cannot
be used.
*When using a wireless type remote controller, install IR Receiver unit to the indoor units.
(Slim duct type, Duct type)
Wired + Wireless
remote controller
Wired + Wireless
remote controller
- (05-28) -
Outdoor unit – indoor unit
connection cable
Remote controller cable
Infrared signal
Outdoor unit – indoor unit
connection cable
Junction box
(Local purchase)
Indoor unit – indoor unit
connection cable
Remote controller cable
Infrared signal