Fujitsu AU*G36LRLA Design & Technical Manual page 324

(4) Insert the connector of the sensor attached to the Fresh Air Intake Kit onto the substrate board
of the indoor unit.
CN8 : White
(5) Insert the included extension cable for use with louver to the connector.
(6) When using the optical receiver unit (option) please insert the included extension wire to the
indoor unit.
(7) Close the control box cover when work is complete.
Installation of decoration panel
z „
(1) After provisional fixing of a decoration panel, feed the louver extension wire (and optical
receiver extension wire) through the penetrating hole.
(2) Connect to the connector wires coming out of the decoration panel.
(3) Please install decoration panel according to the installation instruction sheet provided.
Metal fittings
- (05-95) -