Fujitsu AU*G36LRLA Design & Technical Manual page 334

Duct installation
z „
• Please fasten the connecting parts of the ducts with band, and wrap with vinyl tape to ensure no
air leaks. (Carry out the work to ensure no air leakage at a pressure of 200 Pa)
• Please do not construct the duct in the manner of below.
○Extreme Bends
○Highly Repetitive Bends
○Making the Connecting Duct Diameters Smaller
Completion figure
Indoor unit
Fresh air intake kit
When wiring of the duct fan is required please refer to "
Band (field supplied)
Vinyl tape (field supplied)
Duct (field supplied)
Hanging band for duct
(field supplied)
■
FRESH AIR CONTROL OUTPUT".
- (05-105) -