Kenwood CK 704 Instructions For Use Manual page 22

GAS TAPS
In the event of operating faults in the gas
taps, call the Service Department.
BURNERS
The burners can be removed and washed
with soapy water only.
They will remain perfect if always
cleaned with products used for silver-
ware.
After cleaning, check that the burner-
caps and burner-heads are dry before
placing them in the respective hous-
ings.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
C
F
Fig. 8.1
22
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see fig.
8.1) - failure to do so can cause serious
problems.
Check that the electrode "S" (fig. 8.1) is
always clean to ensure trouble-free
sparking.
S
Fig. 8.2
A
B
Fig. 8.3