Menu Operations - Sony CA4000 Operation Manual

i Shutter indicator
Displays the shutter status. Nothing is displayed if the shutter
is set to OFF.
j F-stop value indicator
Displays the lens f-stop value (iris value).
k Configuration/adjustment progress message area
This area is used when the MESSAGE item in the menu is set
to other than OFF.
When the DISPLAY/MENU switch is set to
DISPLAY and the menu control knob is
pushed
The screen switches to the following status display.
a
d
CHU MODE
ASSIGNABLE
!CC :C
OPT LV:
CAM
ssxxxxxxb
ssxxxxxxb
c
b
a Assignable switch function indicator
Displays the function assigned to the assignable switch
(page 9).
For details about functions that can be assigned, see
"<SWITCH ASSIGN1> 11 (U10)" (page 32) in the
OPERATION menu.
b '!' display area
This area is used to display non-standard status, using the
<'!' IND> function. The display options can be set using the
menu ('!'CC is displayed only when the LA-FZB2 Mount
Adaptor is attached).
For details, see "<'!' IND> 02 (U06)" (page 30) in the
OPERATION menu.
c Optical signal level indicator
Displays the light level using segments.
CAMTBPU: Optical signal level on the BPU connector of CA
unit.
CAMtBPU: Optical signal level on the CA connector of BPU
unit.
BPUTCCU: Optical signal level on the CCU connector of
BPU unit.
BPUtCCU: Optical signal level on the CAMERA connector
of CCU unit.
d CHU MODE indicator
Displays the current connection status (CHU MODE setting)
(page 41).
20

Menu Operations

:PMW-F55
:OFF
C C
BPU CCU
ssxxxxxxb
ssxxxxxxb
c c
Menu Operations
You can make various camera settings using the menu
displayed in the viewfinder.
The following controls are used to operate the menu.
Rear operation panel
TALLY RET1 RET
ON
OFF
MIC PGM1 PGM2
DISPLAY
ON
OFF
OFF
MENU
PROD
INCOM
ENG
DISPLAY/MENU switch
Note
SY model shown.
Menu Display
To display a menu page
Set the DISPLAY/MENU switch to MENU.
The menu page last accessed will be displayed. If this is the
first time, the CONTENTS page of the USER menu will be
displayed.
To display the TOP MENU screen
Push and hold the menu control knob and set the DISPLAY/
MENU switch to MENU to display "TOP" in the top right corner
of the screen.
Turn the menu control knob to move the , cursor to "TOP"
and push the knob to display the TOP MENU, listing the
available menus.
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
2 3 4
Push
ASSIGNABLE
Turn
CALL
Menu control knob