Sony CA4000 Operation Manual page 10

a Rear tally and tally switch
ON: Displays a tally light, for example, in response to a tally
input on the connected camera control unit or when a call
signal is initiated by pressing the CALL button.
OFF: Turns the tally light off.
Note
The front tally and rear tally can be turned on/off using the
menu.
b PGM1 (program 1) and PGM2 (program 2) knobs
Adjusts the audio listening level of program 1 and program 2,
respectively.
c MIC LINE (microphone line) switch
Switches the intercom headset microphone on/off and selects
the intercom line.
PROD: Producer line.
OFF: Headset microphone off.
ENG: Engineer line.
d ENG (engineer line) knob
Adjusts the intercom audio volume of the engineer line.
e PROD (producer line) knob
Adjusts the intercom audio volume of the producer line.
f TRACKER knob
Adjusts the intercom audio volume of the line connected to the
TRACKER connector on the connector panel.
g RET 1 (return video 1) button
Displays the return video 1 signal in the viewfinder while this
button is pressed.
h RET (return video) and 2/3/4 (return video 2/3/4
selector) switch
When using other return video systems in parallel with return
video 1, the return signal selected by the 2/3/4 switch is
displayed in the viewfinder while the RET button is pressed.
Note
The RET 1 button has priority over the RET (2/3/4) button if
both buttons are pressed.
i ASSIGNABLE button
You can assign one of various functions to this button using
the menu displayed in the viewfinder.
j Menu control knob (rotary encoder)
Turn to select menu items and settings in the menu displayed
in the viewfinder, then press to confirm the selection.
k DISPLAY/MENU switch
Selects the screen displayed in the viewfinder.
DISPLAY: Displays text information and messages showing
the operating status, center marker, safety zone marker,
and other indicators, in addition to the camera image.
Pressing the menu control button in display mode
switches the screen to the status display.
OFF: Displays the image only.
MENU: Displays menu, in addition to the camera image.
10
Name and Function of Parts
l CALL button
Turns on the red tally light and CALL light on the RCP-1000
series Remote Control Panel or MSU-1000 series Master
Setup Unit. Used to call the RCP or MSU operator.
Connector panel
INTERCOM
PUSH
1
2
DC OUT
3
RET CTRL TRACKER
4
5
a INTERCOM connector (XLR 5-pin)
Connects to a headset with XLR 5-pin connector for intercom
audio signal input/output.
b AUDIO IN (audio input) connector (XLR 3-pin)
Inputs an audio signal.
PMW-F55 input and CA4000 input sources are available,
selectable in the menu.
Note
When PMW-F55 input source is selected, the PMW-F55 LINE
input reference level changes from +4 dBu to 0 dBu.
c DC OUT (DC power supply output) connector (4-pin)
Supplies power to devices such as a wireless receiver (option)
(10.5 V to 17 V DC output voltage, 0.5 A (max.)).
d RET CTRL (return control) connector (6-pin)
Connects to a CAC-6 Return Video Selector.
e TRACKER connector (10-pin)
Used for an external interface, such as an intercom or tally.
f DC IN (DC power supply input) connector (XLR 4-pin)
Connects to an AC-DN10 AC Adaptor to supply power to the
unit.
g Audio input selector switch
Set to the appropriate position according to the device
connected to the AUDIO IN connector.
LINE: When a line-level (0 dBu) signal is connected
AES/EBU: When a digital audio signal is connected. (The
signal must be synchronized with the camera output.)
MIC: When a microphone is connected
AUDIO IN DC IN
PUSH
6
7
AES/EBU
8
LINE MIC
+48V
OFF
9
REMOTE AUX
0