Table of Contents
Advertisement
MAINTENANCE
Page name
Item
Page No.
<AUTO IRIS>
AUTO IRIS
M04
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
<LENS>
F NO. DISP
M05
LENS AUX
CAM LENS IF
AF DISPLAY
<MIC GAIN>
MIC
M06
<CALL/TALLY>
CCU CALL
M07
CAM CALL
TALLY SW
<OUTPUT FORMAT>
CURRENT
M08 (U13)
Settings
ON, OFF, (ON), (OFF)
1, 2, 3, 4, 5, 6
–99 to 99, ---
–99 to +99, 0
–99 to +99, 65
–99 to +99, 0
ON, OFF
CONTROL, RETURN
ON, OFF
OFF, Type-C, Type-A,
Type-C+12P, Type-A+12P
ON, OFF
20, 30, 40, 50, 60 dB
OFF, ON, ---
OFF, ON, ---
FRONT, REAR, BOTH
1080-59.94P, 1080-50P,
1080-29.97P, 1080-25P,
1080-24P, 1080-23.98P,
59.94P (4x), 59.94P (6x),
59.94P (2x), 50P (4x), 50P (6x),
50P (2x)
Description
Settings in ( ): When a remote control unit/panel or
CCU is not connected, when CHU MODE is set to
F65 and LENS AUX is OFF, and in 4-times/6-times
frame rate modes (cannot be modified).
Selects the auto iris detection window.
1
2
3
4
5
6
Light is detected in the shaded areas.
When LENS AUX is ON.
Temporarily changes the auto iris level brightness
standard by up to ±2 stops.
–99: Closes the iris 2 stops
99: Opens the iris 2 stops
--- : OFF
The setting returns to "---" when the power is turned
off.
When LENS AUX is ON.
±4 stops, when LENS AUX is ON.
When LENS AUX is ON.
Switches the iris indicator on the panel when AUTO
IRIS is off.
CONTROL: Displays the value from the camera.
RETURN: Displays the return value from the lens.
(When AUTO IRIS is on, always displays the return
value from the lens.)
ON: When a lens is connected to the AUX connector
on the rear panel. The CA unit must be rebooted
after changing settings.
Sets the type of lens connected to the PMW-F55.
Enabled when CHU MODE is set to F55.
Enabled only when an AF lens is connected.
Valid only in standalone mode.
---: When a CCU is not connected (cannot be
modified)
Displays the current format.
39
Menu List
Advertisement
Table of Contents
