Editing The User Menu - Sony CA4000 Operation Manual

To cancel a changed setting
Set the STATUS/CANCEL switch to CANCEL before
pushing the menu control knob to restore the original
setting.
To suspend menu changes
Set the DISPLAY/MENU switch to OFF to turn off the
menu screen display.
The menu setting operation can be restarted by setting
the DISPLAY/MENU switch back to MENU.
3
Push the menu control knob.
The ? (question mark) changes back to ,, and the item
setting is registered.
4
To change other settings on the same menu page,
repeat steps 1 to 3.
To enter a character string
If you press the menu control knob when the , cursor is
pointing to a text item, such as a file ID, a square cursor and
the list of selectable characters are displayed.
The cursor is moved by turning the menu control knob.
1
Move the cursor to the position where you wish enter
a character and push the menu control knob.
The cursor is displayed in the character list.
2
Move the cursor to the character to enter and push
the menu control knob.
Repeat steps 1 and 2 to enter other characters.
• Select INS to insert a space character at the cursor
position.
• Select DEL to delete the character at the cursor
position.
• Select RET to return to step 1 without changing the
character.
• Entering the maximum number of characters (up to the
right edge) moves the cursor to ESC on the lower right
of the character list.
3
Select END and push the menu control knob.
The new input string is registered.
To restore the original character string
Select ESC and push the menu control knob.
To restore a setting to its standard value
Select the menu item and push and hold the menu control
knob for 3 seconds when the , cursor is displayed to restore
the setting to the reference file value.
If 10 SEC CLEAR has been set to ON on the <FILE CLEAR>
page of the FILE menu, you can reset the setting in the
reference file for the selected item to the factory-set value by
pushing and holding the menu control knob for a further
10 seconds.
To exit the menu
Set the DISPLAY/MENU switch to OFF.
22
Menu Operations

Editing the USER Menu

You can select desired pages and items from the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus and register them in the USER menu.
Registering frequently-used pages and items in the USER
menu is useful for quickly and simply changing settings.
The following pages are included in the USER menu by factory
default.
Menu page USER
menu No.
<VF OUT> U01
<VF DETAIL> U02
<DYNAMIC FOCUS> U03
<FOCUS ASSIST> U04
<VF DISPLAY> U05
<'!' IND> U06
<VF MARKER> U07
<CURSOR> U08
<ZEBRA> U09
<SWITCH ASSIGN1> U10
<SWITCH ASSIGN2> U11
<HEADSET MIC> U12
<OUTPUT FORMAT> U13
<PROMPTER2 OUT> U14
<SDI OUT> U15
<ROM VERSION> U16
For details about the items on each page, see the source
menu tables in "Menu List" (page 25).
The USER MENU CUSTOMIZE menu allows you to add,
delete, and reorder pages and items in the USER menu to
make it easier to use.
Editing by item
The USER MENU CUSTOMIZE menu allows you to add a
new page to the USER menu and add desired items to the
page.
When shipped, the EDIT page contains factory-preset items,
but USER 1 EDIT to USER 19 EDIT pages are all blank. You
can register up to 10 items, including blank lines, on each of
these pages.
Source menu / Page No.
OPERATION 09
OPERATION 04
OPERATION 05
OPERATION 06
OPERATION 01
OPERATION 02
OPERATION 03
OPERATION 08
OPERATION 07
OPERATION 11
OPERATION 12
OPERATION 14
MAINTENANCE M08
MAINTENANCE M09
MAINTENANCE M10
DIAGNOSIS D03