Setting The Camera Outputs - Sony CA4000 Operation Manual

3
Turn the menu control knob to move the cursor to the
item to set and push the knob.
To use dynamic focus
When DYNAMIC FOCUS is set to "ON" on <VF DETAIL>
page, markers are displayed in response to the luminance
signal and color signal in the area where 4K resolution
video signal can be obtained.
You can set the markers using the following menu items.
FREQUENCY: Sets the detection band of the 4K
resolution high-frequency signal to one of four
options.
CRISP: Adjust to eliminate minute changes in the
detected signal.
LEVEL: Sets the luminance level of the signal for adding
markers.
PEAK COLOR: Sets the color of markers added for
regions above a fixed detection level.
THRESHOLD: Sets the peak color threshold.
CHROMA LEVEL: Sets the color depth of the peak color
display.
4
Turn the menu control knob to move the cursor to the
desired value and push the knob.
5
When finished, set the DISPLAY/MENU switch to OFF
to exit menu mode.
18

Setting the Camera Outputs

Setting the Camera
Outputs
You can specify the video signals output from the camera
using the menu.
The menu pages used for the output settings are registered in
the USER menu by factory default.
• <PROMPTER2 OUT>
• <SDI OUT>
Set the menu items on the above menu pages to the settings
shown in the following tables.
For details about menu operations and the USER menu, see
"Menu Operations" (page 20).
Outputting the signal shot by the video camera
The same textual information as that displayed in the
viewfinder can be added to the output by setting CHARACTER
to "ON" on the <SDI OUT> or <PROMPTER2 OUT> page.
To output as HD-SDI
Menu page Item
<SDI OUT> SDI-MONI OUT
To output as VBS
Menu page Item
<PROMPTER2 OUT> OUTPUT
DOWN CONVERTER
SELECT
Outputting a constant return video
• When a camera control unit is connected, one of the signals
supplied to the camera control unit can be output.
• The last selected return signal is output.
• The same textual information as that displayed in the
viewfinder can be added to the output by setting
CHARACTER to "ON" on the <SDI OUT> or <PROMPTER2
OUT> page.
To output as HD-SDI
Menu page Item
<SDI OUT> SDI-MONI OUT
To output as VBS
Menu page Item
<PROMPTER2 OUT> OUTPUT
DOWN CONVERTER
SELECT
Setting
MAIN
Setting
VBS
MAIN
Setting
RET
Setting
VBS
RET