Attaching The Viewfinder To A Camera - Sony HDVF-20A Operation Manual

Attaching the Viewfinder to a Camera

Stopper
1
Loosen the left-right positioning ring on the
camera.
2
Insert the slide guide which is located on the front
of the camera into the slide rail which is located on
the back of the viewfinder.
3
Slide the viewfinder in the direction of the arrow.
Detaching the viewfinder
To detach the viewfinder from the camera, conduct the
attachment procedure in reverse. When removing the
viewfinder from the camera, pull up the stopper.
Slide rail
Slide guide
2
Left-right positioning ring
1
4
Position the viewfinder by sliding it from side to
side, and tighten the left-right positioning ring on
the camera.
5
Connect the plug to the VF connector on the
camera.
3
4
5
Plug
VF connector
5(E)