Advertisement
Available languages
Available languages
Thermometer:
-
Press "°C / °F" button (B12) to select Temperature to be displayed in Celsius mode or Fahr-
enheit mode.
-
If the temperature is out of the measurable range, LL.L ( beyond the minimum temperature)
or HH.H (beyond the maximum temperature) will be shown on the LCD.
Maximum/Minimum Temperature/Humidity recording function:
-
Press "MAX/MIN" button (B9) to show the maximum or minimum of indoor and outdoor tem-
perature
-
"
" is shown on the LCD if maximum Temperature/Humidity is shown.
-
"
" is shown on the LCD if minimum Temperature/Humidity is shown.
-
Hold "MAX/MIN" button (B9) for 3 seconds to clear the recorded maximum and minimum
reading.
Outdoor Thermo Sensor Unit Registration Procedure:
-
The main unit automatically starts receiving transmission from Outdoor Thermo Sensor after
Weather condition setting. Outdoor temperature digits (A20) blinks.
-
Insert the batteries in the Thermo Sensor Unit. The sensor unit automatically transmit tem-
perature to the main unit. ( Battery compartment (D5) of thermo sensor is located behind the
back cover, unscrews to open.)
-
For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2
or CH3 to ensure each sensor is transmitting at difference channel before inserting batteries.
The Channel select switch (D4) is at the back of the thermo sensor unit.
-
Press " TX " button (D7) on the thermo sensor unit to transmit temperature to the main unit
manually. The main unit gives a "beep" sound if it received the temperature.
Display Outdoor Temperature :
-
Press " CHANNEL" button (B4) to view the 3 Channels' temperature. The sequence is shown
as follow:
Press
"CHANNEL" button
-
Hold " CHANNEL" (B4) button for 3 seconds to cancel unused channel. It will automatically
register a new channel again if a new channel is received.
If there is no temperature displayed in existing channel ( " - - . –" is displayed on the LCD ),
-
hold "CHANNEL" button (B4) for 3 seconds to cancel that channel and receive the channel
again ("Beep" sound can be heard.) Then, press " TX " button (D7) on the thermo sensor unit
to transmit signal to the main unit manually
-
The trend pointer displayed (A21) indicates the trend of the outdoor temperature
indicates the outdoor temperature is increasing.
indicates the outdoor temperature is steady
indicates the outdoor temperature is decreasing
-
Press " °C /°F" button (D6), on the Thermo Sensor unit, to select Temperature to be displayed
in Celsius mode or Fahrenheit mode.
Press
Press
"CHANNEL" button
"CHANNEL" button
Display the three channels alternatively
EN - 29
EN
Advertisement
