Advertisement
Available languages
Available languages
Thermo Sensor Unit Appearance
D1: Outdoor Temperature
D3: Wall Mount Hole
D5: "Channel Selecting Switch"
D7: Battery Compartment
Set Up:
-
Insert batteries.
-
Use a pin to press the RESET (B12) button
Weather Forecast Function:
-
After Batteries inserted, or holding "WEATHER" button (B8) for 3 seconds, Weather Icon (A13)
blinks. Enter the current weather condition by pressing "+" (B12) or "-" (B11) buttons. Press
"WEATHER" button (B8) to confirm the setting. The weather forecast may not be accurate if
the current weather condition entered is not correct.
-
The current weather status should be entered again if the altitude of the weather station is
changed. ( Barometric pressure is lower at higher altitude location. Therefore, altitude change
will affect the weather forecast). The weather station will start the first forecast at 6 hours after
the current weather status is entered
-
Totally 5 different weather condition in the weather forecast.
means Sunny .
means Slightly Cloudy.
means Cloudy.
D2: Transmission Indication LED
D4: °C/°F" button
D6: "TX" button
D8: Temperature Probe Plug & Jack
EN - 27
EN
Advertisement
