Interrupt Mode - Kyocera KM-2050 Basic Operation Manual

Interrupt Mode

Interrupting Copying
BASIC OPERATION GUIDE
Interrupt Mode can be used to
stop copying or printing
temporarily to run a more urgent
job.
After the urgent job is complete,
the interrupted job can be
resumed.
The following Interrupt Modes are available:
Mode
Interrupt Copy
Priority Output
1
Press [Interrupt].
An Interrupt mode OK message
displays.
2
Remove and store the original for the current copying job.
• This mode can be used to interrupt a copy job which is
currently scanning to make copies of a different original
using different settings. After the interrupt job
completes, the previous job settings return and the
interrupted job is resumed.
• This mode can also be used to interrupt copy output to
make a copy of another job. After the interrupt copy
has been produced, the interrupted job is resumed.
This mode can be used to interrupt output of a job to print
an urgent print or received fax job. After the urgent job
completes, the interrupted job is resumed.
NOTE:
To use the fax functions, the optional Fax Kit must
be installed.
Basic Operation
Description
3-15