Optional Finisher - Kyocera KM-2050 Basic Operation Manual

Troubleshooting

Optional Finisher

6-18
5 Turn the dial as shown in the
illustration to remove the jammed
original.
6
Close the Left Cover.
7
Reload all the originals and start copying again.
If a paper jam occurs in the
Optional Finisher, perform the
following procedure to remove the
jammed paper.
IMPORTANT: The drum section is sensitive to scratches and
contaminants. When removing paper, be careful not to touch or scratch it
with your watch, jewelry, etc.
1
Turn the lever to lower the
Process Tray.
2 Remove any jammed paper.
Paper misfeed in
Finisher,lower Process
Tray and remove paper.
JAM80
BASIC OPERATION GUIDE