Kyocera KM-2050 Basic Operation Manual page 107

Cassette 1
BASIC OPERATION GUIDE
WARNING:
sufficient care when working in this area, as there is a danger of electrical
shock.
CAUTION:
working in this area, as there is a danger of getting burned.
IMPORTANT: Do not reuse jammed paper.
If paper is torn during removal, be sure to remove any loose scraps of
paper from inside the machine. Failure to do so could cause another paper
jam later.
Once all jammed paper has been removed, warm-up will begin. The jam
indications will disappear as well and the machine will return to the same
settings as prior to the paper jam.
If a jam occurs in cassette 1,
perform the following procedure
to remove the jammed paper.
1 Pull out the cassette.
2
Remove the jammed paper.
Check to see if paper is loaded
correctly. If not, reload the paper.
NOTE:
If the paper tears during removal, remove any loose scraps from
inside the machine.
High voltage is present in the charger section. Take
The fixing unit is extremely hot. Take sufficient care when
Paper misfeed in
cassette 1.
Remove paper.
JAM11
Troubleshooting
6-11