Installation Precautions - Kyocera KM-2050 Basic Operation Manual

Installation Precautions

Environment
Other Precautions
BASIC OPERATION GUIDE
CAUTION:
Avoid placing the machine on or in locations
which are unstable or not level. Such locations may cause the
machine to fall down or fall over. This type of situation presents
a danger of personal injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt
become attached to the power plug, clean the plug to avoid the
danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or
locations near flammable items, to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and
maintenance, allow access space as shown below. Leave
adequate space, especially around the vents, to allow air to be
properly ventilated out of the machine.
Left:
11 "
13/16
30 cm
Front:
39 "
3/8
100 cm
Adverse environmental conditions may affect the safe operation and
performance of the machine. Install in an air-conditioned room
(recommended room temperature: around 73.4 °F (23 °C), humidity:
around 50 %), and avoid the following locations when selecting a site for
the machine.
• Avoid locations near a window or with exposure to direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
If the floor is delicate, when the product is moved after installation, the floor
may be damaged.
Legal and Safety Information
Rear:
3 "
15/16
10 cm
Right:
11 "
13/16
30 cm
ix