Kyocera FS 9530DN Advanced Operation Manual page 136

Options
4-4
DF-710 Document Finisher
Provides finishing with about 3,000 sheets at a time with high-speed and
large-capacity processes. Also provides a punch function. They are
installed to the left side of the printer.
DF-730 Document Finisher
Provides finishing with about 1,000 sheets at a time. Also provides staple
and off set functions. It is installed to the left side of the printer.
BF-710 Booklet Folder
Provides the staple, punch (option), offset and stitch functions. It is
installed to the left side of the printer.
PH-5A/5C/5D Punch Unit
It mounts to the DF-710 Document Finisher and can punch holes
automatically in printed out paper.
Other Options
• Hard Disk Unit
Enables the electronic sorting and job retention functions. To be inserted
into the slot OPT1/HDD designed for it on the main circuit board of the
printer.
• CompactFlash (Memory) Card
This is a microchip card that may contain option fonts, macros, and
forms. Insert the memory card into the memory card slot located on the
right of the printer. See your dealer for purchasing information regarding
the memory Cards that are best suited for use with this printer.
DF-710
DF-730
ADVANCED OPERATION GUIDE