E-Mps - Kyocera FS 9530DN Advanced Operation Manual

e-MPS

ADVANCED OPERATION GUIDE
e-MPS is an abbreviation for 'enhanced-Multiple Printing System' which
implements the following functions that are available from the printer
driver:
• Job Retention
• Job Storage
In either job mode, when printing a document, the print data is transferred
from the computer to the printer then stored on the printer's hard disk.
Since copies of the document are printed using the stored data, printing is
performed faster with less computer spooling time and less network traffic.
NOTE:
To use the e-MPS system, an optional hard disk must be installed
in the printer. For details, refer to Options on page 4-1. As an alternative
to a hard disk, the RAM disk may be used in the Proof-and-Hold and
Private Print modes. To activate the RAM disk in the printer, refer to
Operating the RAM Disk on page 2-70.
Job Retention
Job Retention has four modes as summarized below. These modes are
selected when you choose on the printer driver through the application
software:
Primary function
Storing started
Retrieved by
Default number of
copies printed at
retrieval
Maximum number of
jobs stored*
PIN security
Data after printing
Data when power off
Using the Operation Panel
Quick Copy
To later print
additional copies
Printer driver
Operation panel
Same as storing
32,expandable to 50
No
Retained
Deleted
Proof-and-Hold
To proof the first copy
before printing
multiple copies
Printer driver
Operation panel
One less
32,expandable to 50
No
Retained
Deleted
2-23