Changing Image Quality Settings For A Modality - Selecting A Lookup Table - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Changing Image quality settings for a modality - Selecting a lookup table

Perform steps 1 and 2 of the
1
page 68.
On the Change settings menu, press the Down key four times, followed by the
2
Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 etc...
Press the Up/Down key, followed by the Confirm key to select the modality for
3
which you want to change the Image quality settings.
The 'Image quality' screen for the selected modality is displayed:
<Modality name>
Do one of the following:
4
•
If you want to attribute the default profile, select 'Profile default' and press the
Confirm key.
The Drystar 5302 will be loaded with these settings and return to the 'Image
quality' main menu (see step 2).
•
If you want to add a custom profile, select 'Select other' and press the Confirm key.
Proceed with step 5.
•
If the parameter for the selected modality has been set via a remote computer, you
will not be able to change the image quality information for this modality via the
local keypad. In this case the following screen will appear:
<Modalityname>
In case the image quality parameters need to be changed for this modality, please
use the DICOM Configuration tool in the Key-operator mode via a remote
connection. For more information, refer to the chapter
Drystar 5302 via a remote PC (with
this modality (refer to
with the same name. For this new modality new parameters can be assigned via the
local keypad (refer to
92
Advanced operation (Key-operator mode)
'Accessing the Change settings menu'
browser)'. Alternatively, you can also remove
'Removing a modality'
'Adding a modality' on page 86).
procedure on
'Controlling the
on page 85) and add a new modality
2830A EN 20050526