Changing The Domain Name - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Changing the domain name

Perform steps 1 to 2 of the
1
page 68.
On the Change settings menu, press the Down key three times, followed by the
2
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
On the 'Network (DICOM)' screen, press the Down key twice, followed by the
3
Confirm key to select 'Domain name'.
The 'Domain name' screen is displayed:
If the Domain name has already been assigned, it will be shown on the display.
Enter the domain name by means of the arrow keys. Refer to
4
page 31.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
80
Advanced operation (Key-operator mode)
'Accessing the Change settings menu' procedure on
'Data entry' on
2830A EN 20050526