Viewing Input Tray Information - AGFA Drystar 5302 Reference Manual

Viewing input tray information

In this manual, we always will elaborate a case for the lower tray. The procedures of
showing the settings are identical for the upper tray.
On the Show settings menu, press the Down key once to see the upper tray settings,
twice to see the lower tray settings
Perform steps 1 and 2 of the
1
page 57.
On the Show settings menu, press the Down key once to see the upper tray
2
settings, twice to see the lower tray settings, followed by the Confirm key'.
The 'Input tray' screen is displayed (example):
DT 2B
Film format:
14x17
Film view:
Normal
Prints current pack:
53
Total prints tray:
4
RF-tag info:
Film type:
DT 2B
Film format:
14x17
EKL9M
202547906
82
The following information is displayed for the input tray:
•
the status of the Film Identification tag (OK, disabled, overruled),
•
the actual film data, as it has been modified by the key-operator:
•
film type,
•
film format.
•
the film view (normal, back),
•
the number of prints for this film pack,
•
the total number of prints for the input tray,
•
the film data read from the film identification tag:
•
film type,
•
film format,
•
brand (ABC code),
•
order number,
•
pack number.
Press the Confirm key to return to the Show settings menu.
3
2830A EN 20050526
'Accessing the Show settings menu'
Status: OK, disabled or overruled
D 5302 R
RYSTAR EFERENCE MANUAL
procedure, on
Advanced operation (Key-operator mode)
59