Reading, Writing And Deleting Messages; Reading Text Messages; Sending Text Messages - Multitech MultiConnect Cell 100 Series MTC-EV3 User Manual

CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
Enter:
AT#FTPGET="filename.txt" where filename.txt is the file you want to download.
The device responds with:
CONNECT
The file is received through the device. The device responds with:
NO CARRIER
The data connection closes automatically when the file sending ends.
Closing the FTP Data Connection
When you finish sending the file:
1. Close the FTP connection.
Enter:
AT#FTPCLOSE
2. Close the PPP data connection.
Enter:
AT#SGACT=1,0
The device responds with OK.

Reading, Writing and Deleting Messages

Reading Text Messages

To read a text message in text mode:
1. Put the device in text mode.
Enter: AT+CMGF=1
2. Read message.
Enter: AT+CMGR=1
Example response:
+CMGR: "REC UNREAD","+16155554562z`z","","13/09/05,13:39:40-20"
How are you?
OK

Sending Text Messages

To send a text message in text mode:
1. Put the device in text mode.
Enter:
AT+CMGF=1
The device responds.
OK
2. Enter the recipient's number and your message.
Enter:
AT+CMGS="##########"
24
®
MultiConnect Cell 100 Series MTC-EV3 User Guide