Table of Contents
Advertisement
CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
CONNECT
The file is received through the device. The device responds with:
NO CARRIER
The data connection closes automatically when the file sending ends.
Closing the FTP Data Connection
After the file is sent:
1.
Close the FTP connection.
Enter:
AT#FTPCLOSE
2.
Close the PPP data connection.
Enter:
Verizon:
AT#SGACT=3,0
Other Networks:
AT#SGACT=1,0
The device responds with OK.
Reading, Writing and Deleting Messages
Sending Text Messages
To send a text message in text mode:
1.
Check signal strength.
Enter:
AT+CSQ
2.
Verify device is registered on the cellular network.
Enter:
AT+CEREG?
Should return:
+CEREG: 0,1 or +CEREG: 0,5
OK
3.
Put the device in text mode.
Enter:
AT+CMGF=1
The device responds.
OK
4.
Enter the recipient's number and your message.
Enter:
AT+CMGS="##########"
>Your message here
where ########## is the recipient's number.
5.
Send the message.
24
®
MultiConnect
microCell MTCM-LNA3 User Guide
Advertisement
Table of Contents
