Outback Charcoal Kettle CK575 Assembly And Operating Instructions Manual page 6

3
C3
C2
Thread the straight ends of the Leg Support Rack (C3) through the holes in the bent leg and
then insert the securing end of the leg support rack into the hole in the end of the leg, as shown.
Secure the Legs (C2) to the leg supports by inserting M6x15 Bolts (D1x2pcs) and screwing into
leg supports.
4
Slide Wheels (C4) onto each straight bar of the leg support rack. Secure the wheels into place
with the Locknuts (D8x2pcs). Place the Wheel Hubcaps (C5) onto the outside of the wheels,
and fix leg support rack using R-Clips (D7x2pcs) as shown.
C4
D7
6
C5