Outback Charcoal Kettle CK575 Assembly And Operating Instructions Manual page 5

Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
Remove any internal components or packaging from the barbecue body.
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
barbecue.
1
Attach the Heatproof Spacer (B6) onto the Barbecue Body (B1) by inserting M6x50 Bolts
(D5x3pcs) through Spring Washers (D2x3pcs), Spacers (D3x3pcs) and Ø6 Washers (D4x3pcs),
through barbecue body, as shown.
2
Attach the M6x50 bolts screwing into Bent Leg (C1) as shown.
C1
5
D2
B6
B1
D3 D4
D5