Installation; Protective Flap, Welding Machine Control - EWM Phoenix 355 Progress puls MM TKM Operating Instructions Manual

Design and function

Installation

5.4 Installation
Installation site!
The machine must not be operated in the open air and must only be set up and
operated on a suitable, stable and level base!
•
The operator must ensure that the ground is non-slip and level, and provide sufficient
lighting for the place of work.
•
Safe operation of the machine must be guaranteed at all times.
5.4.1

Protective flap, welding machine control

Item Symbol
1
2
3
•
Push the right-hand bracket of the protective cap to the right and remove the protective cap.
26
Description 0
Protective cap
Lid
Bracket, protective cap
CAUTION
Figure 5-1
099-005319-EW501
22.05.2014