Selecting The Language Of The On-Line Guide; Options - Physis Piano H1 User Manual

Press [ENTER] to start the process or [EXIT] to abort.
To visualize other functions of the Setup menu, press [ ] or [ ].
Press [EXIT] to recall the FUNCTION menu.
NB
When starting a Factory Reset, all changes made by the user will be irreparably lost. To prevent that, first save your
own Sounds, memories and/or settings to a USB pen (see procedure in par. 11.9)

11.2 SELECTING THE LANGUAGE OF THE ON-LINE GUIDE

To select the language of the SOUND ENGINE guide related to the φPIANO, φE.PIANO and φMALLET, families, place the
cursor on the Language (Help) field.
Now press the [ ] Key Touch and then [ ] or [ ] to select the desired language.
To access a different function of the Setup menu press [ ] then [ ] or [ ].
To return to the FUNCTION menu press [EXIT].
IMPORTANT NOTE
The Language (Help) field appears translated into the selected language.

11.3 OPTIONS

Selecting the Options field, three general options can be set:
Press [ ] or [ ] to move the cursor. To modify the selected function, press [+] and [-]. Changes will be immediately saved.
These functios allow to:
-
: Outputs Mute: if this function is set as On, plugging the headphone jack into the [
the audio outputs on the rear panel. This will not happen if the function is set as Off.
-
Digital Out Level: the digital output signal of the [DIGITAL OUT] connector on the rear panel.
-
Last Selection: this function sets what Memory is recalled each time the instrument is switched on. When the function
is Off the system automatically selects Memory 01 of the φPIANO family. If the function is set as On, the system recalls
the last selected Sound or Memory.
To access a different function of the Setup menu press [ ] then [ ] or [ ].
To return to the FUNCTION menu press [EXIT].
User Manual – Instrument general settings
EN - 39
] connector will mute all