User Manual – Sounds
PROGRAMMING A VELOCITY CURVE: A QUICK GUIDE
Acces the velocity curve page, then:
1.
Select a User curve.
2.
Press [F3].
3.
Press [F1], [F2], [F3] or [F4] to select a starting curve.
4.
Press
[ ] or [ ] to select the point of which you wish to set the Gain value.
5.
Press [+] or [-] to set the Gain value.
6.
Press [EXIT].
8.8 ACTIVATING THE METRONOME
Physis Piano offers a metronome function, useful when practicing. To set up and activate the metronome, press [F4] under
the main Sound page, or press [FUNCTION] and select the Metronome function. The following page will appear:
To move the cursor, use [ ] or [ ]. Press [+] or [-] to adjust the values. Parameters are:
-
Tempo: metronome's tempo.
-
Time Signature: set time signature
-
Upbeat: upbeat presence
-
Volume click: metronome's tick volume
-
Sync from: selezione della sorgente di sincronizzazione,
•
Int.: internal tempo
•
USB: tempo is derived from the Midi Clock received from the [USB to HOST] port
•
MIDI: tempo is derived from the Midi Clock received from the [MIDI IN] port
NB.
•
To synchronise the metronome to the MIDI clock, first you need to disable the MIDI Real Time filter. To do so,
access the Midi page under the FUNCTIONS menu (for further information see par. 11.8)
•
When "Sync to MIDI" is active, the tempo cannot be adjusted from the video page. The screen will only show the
tempo value of the MIDI Clock.
Press [F4] to activate the metronome. Press again to deactivate.
When the metronome is active, an icon will appear on the top right of the screen.
EN - 32